Discount Applies

The FETtec FC G4 features the latest STM32G473 processor. Providing unparalleled processing power to your aircraft. Along with an IIM-42652 SPI g...

  Details Variant: 8cm 12cm 20cm Weight: 2 g

Designed by the godfather of circular polarization (IBCrazy, Video Aerial Systems LLC) and manufactured by Team BlackSheep, this antenna is your ch...

This hat design was inspired by the original Ethix logos from before we had an official logo. The triple E logo was something that was tossed aro...

4-in-1 multi protocol module for TBS Tango 2 and other lite adapter radios TBS Multi Protocol Module (MPM) Transmitter Module, compatible with Open...

Fat goggle strap so your DJI FPV goggles strap on tight while you teleport to another dimension! The HD version of the Ethix goggle strap is made ...

Firmware FOXEER_Reaper4IN1_F4_65A_128_Multi_32_9 Continuous /Burst Current 65A*4 / 100A*4 Input Voltage DC 9V~40V (3-8S Lipo) BEC No ...

6The Caddx Polar Micro Vista Unit is an advanced video transmission module that supports a 5.8 GHz digital video signal and 720p 60fps image transm...

TBS Solder is spec'd accordingly to Chris Dunkel aka RiSCyD, our lead engineer. Easy to solder, plenty of flux to make sure it cures nice and looks...

Introducing our next product in the flat rat line up is our 3” cine frame. When we looked into what we wanted in a small compact cine frame the ma...

One set of three prop bags joined together to efficiently organize CW, CCW and broken propellers   For most of us carrying a huge bag of mixed pack...

The Caddx Nebula Pro Digital FPV Camera is here! This HD camera measures 19x19mm and only weighs 6g, which is less than the DJI Digital FPV Camera...

Axis Flying AF223 FPV Drone Motor   SPECIFICATIONS: Stator Size: 22*3mm Shaft Diameter: 5mm Rated Voltage: 3-6S Max Power: 570w Configuration: 12...

After years of anticipation, the new Apex frame from ImpulseRC is here! Designed in collaboration with Mr Steele, the ApexDC brings improvements to...

Coming on hot with a merger of our v1 and v2 straps trying to ever refine something as simple as a goggle strap.  This strap is now improved with...

The TBS Crossfire Nano RX Pro is a higher telemetry output power option of the de-facto FPV standard receiver. It packs up to 500mW of output power...

Tattu R-Line Version 4.0 1550mAh 22.2V 130C 6S1P LiPo battery pack is the updated version of R-Line series in 2021. With More Punch, Lower Interna...

Features: Full FETtec AIO with KISS FC Firmware 4 ESCs 15A 2-4s Graphical OSD with full KISS tuning  FC: STM32F303CCT6 @ 72MHz MPU6000 Supply v...

Bringing all the features from their larger FC, the Nano is a high power F4 Processor which is compatible with all common ESC protocols, as well as...

Only built on request.  Please contact us to order yours today. Using our refined building techniques we have developed the DRP 3 inch CineW...

Brand new Ethix straps with the Triple-E logo! Sometimes one strap does not fit all. This is our new 16x230mm Triple E lipo strap. We have revised ...

Never lose or mix up a micro SD card again! Stores up to 10 SD cards in a credit-card sized cradle. Losing track of micro SD cards is always a conc...

Introducing the TBS Ethix Mini 5.8GHz Analog Mini FPV watch/screen. Afterliterally years of going through different production ideas for ways tobet...

TBS TRACER MICRO TX In a race, microseconds count. Goggles down, thumbs up - are you ready for a true 250Hz radio link? End to end latency: bare...

INTRODUCING THE IMPULSERC WOLF V3 OSD PDB The new Wolf v3 in an exciting upgrade which now fits perfectly in the Apex and Reverb frames, as well a...

About this product The Diatone MXC3.1 Frame Kit is a high-performance 3" frame with red ducts! Experience amazing footage with this powerful and ...

  The Crossfire module boiled down to its pure essence for long range up to 40km, and FPV racers that need ultra low latency. Now with a li...

Premium leaded solder with integrated flux to make any solder work a breeze! TBS Solder is spec'd accordingly to Chris Dunkel aka RiSCyD, our lead ...

Connect the charger to the power supply. The IMARS III LOGO will display for about 2 seconds before entering Charger mode. The top-level menu is d...

Make way for this Groundstation powerhouse, The TBS Groundstation Battery comes installed with an integrated balancer and low voltage cut off. 5Ah ...

About this product The DJI O3 Air Unit is finally here! Integrating DJI's cutting-edge video transmission technology into a lightweight and...

The Diatone Mamba MK4 Mini Stack features a 20x20 MK4 F405 Flight Controller and 30A ESC. With OSD and an MPU650 Gyro, this stack is the pe...

The XRotor Micro Combo from Hobbywing continues to impress with its latest iteration. The Micro Combo features a 60A 4-in-1 ESC along with an updat...

The OCP 5.8 is our new everyday omni antenna. Proven design, great signal, durable and look amazing.   DESCRIPTION The OCP 5.8 is our new everyday ...

Tattu R-Line 550mAh 7.4V 95C 2S1P Lipo Battery Pack with XT30 plug has full capacity and discharge rate. It is a high discharge rate FPV raci...

Propeller Diameter: 8 inch       Pitch : 4.5               Blades : 3Material : Carbon Reinforced Nylon       Weight : 15.5gHub Diameter :18mm     ...

BT2.0 Connector - the most significant revolution in 1S Tiny Whoop Drone.  Not sure if it's worth to switch BT2.0 connector? Check more from Joshua...

About this product The RunCam Link Wasp is a digital FPV system that is DJI FPV Remote Controller compatible. Users can connect their DJI FPV...

Introducing the Diatone Mamba MK4 H743 Flight Controller. This is a full featured flight controller with the latest H7 processor and dual I...

Tattu 14.8V 75C 4S 850mAh Lipo Battery Pack with XT60 Plug  provide high quality, reliable power for 150mm, 180mm sizes FPV Quadcopters.   Feature...

Diatone Mamba F40 40A 6S BLS 4-in-1 ESC The Diatone Mamba F40_BLS 6S 4-in-1 is a 30x30 ESC that provides a high-power BLS in a small, but easy-...

Axis Flying's new AE2207 brings the performance you've come to expect from their most premium motors, now in an economical package. These m...

Premium performance. That’s been the focus of AxisFlying since we started a year ago. The AF series, and now the BB series. We pushed the ...

This Micro TX is designed by Happymodel and based on the open source- ExpressLRS which is a very popular low latency and high re-flashed rate RF m...

This Slim Pro TX module is designed by Happymodel and based on the open source- ExpressLRS which is a very popular low latency and high packet rat...

Mamba F405 MK2 FC Mamba F405 Flight Controller Betaflight STM32 MPU6000 OSD Built-in 5V/2A BEC SpecificationsMCU: 168MHz STM32F405RGT6 32BITIMU: ...

Description