Skip to content

FETtec FC G4 -N v1.7

by FETtec
Sold out
Original price $79.99 - Original price $79.99
Original price
$79.99
$79.99 - $79.99
Current price $79.99

The FETtec FC G4 features the latest STM32G473 processor. Providing unparalleled processing power to your aircraft. Along with an IIM-42652 SPI gyro, two 5v BECs, 6-27V (2-6S) power handling, and a host of other features, the G4 from FETtec is on the cutting edge of Flight Controller technology.

 What does "N" version mean?

This product has no onboard analog OSD.

Except for the removed analog OSD, there are no restrictions and you can use the full potential of our fc as you are used to.
Use with other OSDs/ digital FPV systems is still possible as usual.

Features:

  • Latest STM32G473 Processor

      • 180Mhz + Math accelerator
      • Gyro IIM-42652 SPI
  • Supply voltage 6-27V (2S-6S Lipo)

  • 2x dedicated onboard BEC (max. 600mA each)

    • 5V BEC for RX

    • 5V/16V BEC for VTX (switchable and real Pit*)

  • 2x 8 pin connector for solder free ESC connection

    • Connector 1: ESC signal 1-4, telemetry, VCC, GND

    • Connector 2: ESC signal 5-8 (depending on UAV type 1-4), telemetry, VCC, GND

  • 1x 8 pin connector for solder free VTX, cam connection and OSD or digital systems

    • real Pit* VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3

  • 2x 6 pin connectors for serials

    • RX1, TX1, 3.3V, VCC, 5V, GND

    • RX3, VCS/TX3, RGB LED, VCC, 5V, GND

  • 1x 4 pin connector for receiver

    • Signal, TLM, 5V, GND

  • 5 UART serials

    • UART 1 free

    • UART 2 used for Receiver

    • UART 3 free

    • UART 4 used for onboard OSD, can be set free

    • UART 5 used for ESCs / TLM / Onewire

  • 4 ESC solder pads (Signal/GND) in each corner

  • Buzzer pads

  • 4 tiny RGB LEDs (selectable color)

  • Supported ESC protocols

    • PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire

  • FETtec KISS firmware

  • Onboard OSD

    • Graphic OSD (STM32)

    • Full KISS Tuning

      • Filter (PIDs, Rates, Settings)
      • LED control (RGB LED, Racewire)
      • VTX
      • Live data graphs (Voltage, motor rpm, current, motor temp, gyro values, link quality)
      • KISS GPS support + live map
      • Custom graphic pilot logo
      • Stick overlay
      • Custom layout
      • can be deactivated for usage of digital systems
  • Connector type: JST-SH-1mm

 

*real Pit-Mode: A power supply pin which is remotely switchable

 

Dimensions:

dimensionsO2BNL0T723GCJ

  • Maximum outside dimensions: 37,2 x 37,2mm, without outside tips 30 x 30mm

  • Mounting hole arrangement:

    • 20 x 20mm with M2 mounting hole (expandable to M3)

    • 30 x 30mm with M3 mounting hole

    • 30 x 30mm mounting hole tips are removable to reduce overall FC size

  • Overall height: 7,9mm

  • Weight: 5,37g

 

Firmware:

  • KISS Firmware
  • FETtec OSD Firmware

 

Scope of delivery:

  • 1x FETtec FC G4
  • 1x 8 pin cable (open on one side)
  • 1x 6 pin cable (open on one side)
Related links to "FETtec FC G4"
Available downloads:

Customer Reviews

Based on 1 review Write a review